https://JOBS.MERITHALL.COM/ en-us Paint Line General Labor - Day & Afternoon Shift
Garden City - $18 Per Hour

Paint Line General Labor:

• Hang parts on paint line for painting process.
• Load/Unload material from the paint line.
• Maintain organization of jobs/ parts during load/unload process.
• Perform quality inspections on incoming & outgoing materials & products.
• Pull tag from job rack/cart or pallet, match it to the job cut sheet to verify job match, initial and date.
• On occasion, conducts physical inventory counts; replenishes stock from back-up locations as needed.
• Maintains a safe, clean working environment.
• Participates in quality improvement efforts.
• Walking, bending, and climbing stairs.
• Behavior & conduct: Expected to follow rules and regulations.
• Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons.
• Working 8–10-hour shifts, 6 days a week

This job may require the physical ability to perform duties assigned including but not limited to extensive
standing, walking, bending, kneeling, squatting. Continuous lifting to 75 pounds from floor to average
waist-high platform, and use of various hand tools and instruments, and extreme temperatures.

Requirements:

• Must be able to follow directions.
• Must be able to lift 50 Pounds.
• Must have steel-toe boots/shoes.
• Must wear appropriate safety equipment.
• Must be able to work 8–10-hour shifts.
• Must be committed to excellence & high standards.
• Must be able to pay acute attention to detail.
• Must be able to handle multiple projects & meet deadlines.
• Must have strong interpersonal skills.
• Must have the ability to understand and follow written & verbal instructions.
• Must be able to speak, read, and write and understand the primary languages(s) used in the workplace.
• Must be able to stand for 8–10-hour periods, bend, and lift up to 50 pounds.
• Must be on time & demonstrate regular attendance.

Job Type: Full-time

Pay Rate:  $18Per Hour, 

Shift Hours:   
Day Shift:               5 AM to 1 PM or 3 PM, Monday through Saturday
Afternoon Shift:    3 PM to 11 PM or 1 AM, Monday through Saturday

Submit Candidate Resumes to:
The HR Assistant or the HR Manager
A Pre-Placement Job Site Interview with HR Assistant is NOT Required.
Note:  Candidate Must be able to read a Tape Measure and then complete the Culture Survey prior to Submitting Resume to Client.
Once Accepted by our Client, the HR Assistant will Email the Candidate and Orientation Invite.

Decision To Interview:  Based on Skill and/or Experience Level

Drug Screen and Background Check Required:
Enhanced Nationwide, NSOPW, 10-Panel Drug Screen With THC.
No Violent Crime or Sex Offender Felony Convictions allowed.

This is intended to be a 4-Week Temp Opportunity.
]]> Wed, 26 Feb 2025 00:00:00 EST 0 We are seeking full-time laborers to become part of our team Western Metro Detroit.  Prior experience is not necessary, as we teach suitable candidates while on the job. 
Responsibilities:
Responsibilities would be assisting heavy equipment operators in performing the following tasks:

• Installing infrastructure for residential and commercial projects.
• Setting grades.
• Installing water and sewer mains.
• Installing storm sewer systems.
• Excavating and backfilling 
• racking and shoveling
• Clearing trees from building sites.
• Must be willing to learn how to operate a skidsteer. 

Qualifications:

• Must be hardworking and self-motivated.
• Must have a valid Driver's License.
• Must have good transportation.

Pay: $18.00 - $20.00 per hour plus healthcare.  
Hour: 55 or more hours per week.  Overtime after 40 hours worked in one week.  We do work Saturdays.   ]]> Mon, 19 Aug 2024 00:00:00 EDT 0 Heavy Equipment Mechanic

We are a locally-owned Milford, MI area site contractor currently seeking heavy equipment mechanic to join our maintenance team.  Most of our heavy equioment is Caterpillar 

Responsibilities:

• Diagnose, rebuild, and repair mechanical, electrical, hydraulic, and diesel systems of heavy operating equipment.
• Perform maintenance and repair on heavy equipment, trucks, trailers, and tools while using a high degree of independent judgement.
• Accurately order needed parts from vendors.
• Perform inspections and preventive maintenance.
• Prepares and maintains records and reports.
• Extensive knowledge of construction or heavy equipment and advanced understanding of schematics and diagrams.
• Performs all duties in conformance to appropriate safety and security standards.

Required Qualifications:

• 5 years of experience
• CDL Class A license required
• Must be 18 years of age or older
• Flexibility of working hours and location (shop and field repairs)
• Reliable transportation
• Excellent communication skills
• Be a team player with a professional attitude
• Competencies: Technical Capacity, Time Management, Thoroughness, Problem Solving/Analysis, Discretion.

Job Type: Full-time

Pay: $35.00 - $42.00 per hour  Health insurance

Expected hours: 40 – 60 per week

Drug screen and background check are required
]]> Wed, 22 May 2024 00:00:00 EDT 0 Journeyman/Senior Level - Carpenter - Ypsilanti - Days - $25 Per Hour

This is a full-time, W-2 employment opportunity that offers health insurance.

Requires reliable transportation; will work primarily at an Ypsilanti Based
Multi-Unit Apartment Complex and possibly other various Detroit Area properties, performing new and old residential and commercial building construction, remodeling, maintenance and repair duties and responsibilities.

Carpenter must be able to work alone with little to no supervision to complete projects to expectations; after receiving a project Line-up from the Project Superintendent.

Must also be able to Lead and Supervise other Construction Crew Members.

If you have Apartment Maintenance & Repair experience, this is a Great Opportunity for you!

Must be Proficient at the following: 

• Print Reading and Math
• Finish and Trim Carpentry
• Interior and Exterior Carpentry
• Kitchen, Bathroom and Basement Remodeling & Repair
• Hardwood, Ceramic Tile and Laminate Floors
• Light Electrical
• Light Plumbing
• Drywall Installation and Repair
• Paint Preparation
• Window and Door Installation and Repair
• Framing and Rough Carpentry is a plus
• Demolition is a plus
• Fire & Water Damage Restoration experience is a Big Plus

This is a long term assignment

Wage: $25.00 Per Hour

Shift Schedule: Monday through Friday

Shift Hours: 7:30 AM to 4:00 PM

Job Site Location:
Ypsilanti, MI mostly, but varies from day-to-day & project-to-project and can be in Detroit and/or other cities in South-East Michigan.

Note: Must have Current MDL, Auto Insurance and own reliable Transportation to Drive own Vehicle to/From Job Sites and possibly Drive a Company Vehicle.

 
]]> Tue, 08 Aug 2023 00:00:00 EDT 0 Die Chaser/Die Polisher - Afternoon & Midnight Shifts
Garden City - $18 Per Hour
 Day Shift (5 AM to 3 PM) 
Afternoon Shift (3 PM to 1 AM)
Midnight Shift (11 PM to 7 AM)
(Training On Day Shift - 7 AM to 3 PM)

Hiring for both Shifts at the Garden City Facility, with potential shift and location change based on business needs.

Die Chaser/Polishers are responsible for polishing, cleaning, inspecting, and resurfacing the cavities and bores of die castings by using hand tools and machines, help to repair and/or replace any damaged dies, preparing and set up of dies and die components for current and future use as workload demands, and maintain proper keeping-placement of all dies and die shop components for current and future use.

This position requires: 

• Punctuality
• Excellent Attendance
• Availability to work in multiple plant facilities
• Use of various hand tools and instruments
• Extreme temperatures.

Physical ability to perform duties assigned including but not limited to:

• Extensive standing/walking
• Extensive bending/kneeling/squatting
• Continuous lifting up to 75 pounds from floor to average waist-high platform

Duties include but are not limited to:

• Inspect and Polish dies so they are ready for production
• Assist in die corrections
• Load, start and monitor nitrider
• Deliver the dies to presses according to schedule and bring back extruded dies for caustic/storage
• Responsible for maintenance of all extrusion dies to achieve maximum productivity
• Polish dies after die correction is completed
• Must have previous experience of die polishing and/or correction
• Must possess the working ability and/or willingness to work with caustic solution
• Run the dies through the caustic solution to clean excess aluminum out of the die
• Assemble and break down tooling assemblies
• Make sure the dies are clean and there are no remaining aluminum remnants left
• Die storage- putting the dies away and retrieval- taking the dies out of storage
• Ensure a safe and clean work environment
• Wear safety equipment and follow safety protocol
• Operating hand tool including Hammer and chisel
• Clean work area end of shift
• Knowledge of production operation and experience in manufacturing environment
• Perform any other assignments given

Minimum Requirements:

• Must have knowledge of Dies/Die Shop, but willing to train; training will be on days for a period of time until competent, then transfer to midnights
• Must be 18years or older
• Must be able to read and write in English fluently with proficiency
• Must have at least a High School Diploma, GED.
• Certification or Associate Degree in Manufacturing is a plus
• Must have basic computer skills
• Must be reliable, punctual and maintain excellent attendance
• Must be able to work shift assigned and be flexible with scheduling (either afternoons or midnights) based on business needs
• Must be willing to work between plant locations (Garden City and Livonia)
• Must possess good attitude
• Must be able to work well with others in a team environment
• Must be able to follow directions and perform assignments given through completion
• Possess knowledge of safety and productivity around the aluminum extrusion press is a plus

Pre-Employment Screening:

Must possess a valid Driver’s License (to travel between plants as scheduled/assigned)

Must be able to pass stringent Background Check, Drug Screening, and Medical Exam (any of these may be required)

Job Type:  Full Time

Pay:  $18 Per Hour

Shift/Hours:
Day Shift: Monday through Friday, 5 AM to 1 PM or 3 PM
Afternoon Shift: Monday through Friday, 3 PM to 11 PM or 1 AM
Saturdays and Sundays, As Required and Directed,
Break: 25 Minute Paid Break,
Employees MUST Punch-out if they leave the facility during break and will not be paid.

Submit Candidate Resumes to:
The HR Assistant or the HR Manager
Schedule a Pre-Placement Job Site interview with HR Assistant to determine Orientation Date
Note:  Candidate Must complete the Culture Survey prior to Submitting Resume to Client.

Decision To Interview:  Based on Skill and/or Experience Level

Drug Screen and Background Check Required:
Enhanced Nationwide, NSOPW, 10-Panel Drug Screen With THC.
No Violent Crime or Sex Offender Felony Convictions allowed.

This is intended to be a Temp-To-Hire Opportunity

 
]]> Mon, 07 Aug 2023 00:00:00 EDT 0 Sheet Metal Fabricator/Welder/Model Maker
Garden City - Days - $27 to $33 Per Hour
We are looking for a Prototype Sheet Metal Fabricator/Welder/Model Maker familiar with Prototype Sheet Metal Stamping, Fabricating and Assembly.

Summary: Analyze specifications, lay out metal stock, set-up and operate machine tools, fit, weld and assemble details and build/fabricate to print.

RESPONSIBILITIES:

• Read and interpret engineering drawings and specifications of tools, dies, prototypes or models
• Prepare templates and sketches and determine work processes
• Work with close tolerances.
• Plan, build, tryout, PM, and repair stamping dies and related press tooling.
• Perform ordinary die development work, tool machining operations, skilled fitting, assembly, spotting, adjustment and timing.
• Perform project tryout, diagnose and then correct any accompanying problems ensuring that the final project adheres to pre-established specifications (cad data or part print).
• Dismantles dies, repairs / replaces damaged details or components, verifies that the repaired die operates correctly.
• Operate tool room equipment including but not limited to: Brake, Sheer, Mig & Tig Welding is a Plus, Drill Press, Mills, Lathes and Grinders.
• Must have all tools common to trade practice.

REQUIREMENTS:

• Must be a Journeyman/Senior Level Sheet Metal Fabricator/Welder/Model Maker with minimum of 5 years experience working with metal stamping dies
• Able to perform all essential job functions with little to no supervision and with or without a reasonable accommodation 

Candidate to Client Submission Procedure:  Upon successful MeritHall Interview, Candidate Resume is Emailed to Client, a Job Site Interview is Scheduled and after a successful Interview a Wage Rate and Start Date is negotiated.

Job Type: Full-time

Pay Range:
$27 to $33 per hour, determined by Client, following successful site Interview.

Schedule:

• Monday through Friday: (Required) 7 AM to 3:30 PM, (5:30 for 10-Hour Schedule)
• Saturday: 7 AM to Noon or 3:30 PM, as Required and Directed
• Sunday: (Rarely and only as Required and Directed)

Experience:

• Prototype Sheet Metal Model Maker: 8-Years (Preferred)

Additional Requirements: 
Must work well with others and be reliable.
Must be willing to work overtime and weekends as required.
Education:

• High School or Equivalent (Preferred, but Not Required)

This is a Temp-To-Hire Option

If/When Hired Direct by Client:  Benefits are available after 90-Days, including: BC/BS, Optical, Dental, 401K, Paid Holidays and Vacation, Christmas Bonus,
Benefit Conditions:  Waiting period may apply]]> Fri, 19 May 2023 00:00:00 EDT 0 Machinery Maintenance & Repair Tech. - Taylor, MI
Flexible To Work All Shifts - $28 to $30 Per Hour
Job Description:

• Pump Maintenance: 1" - 3" progressive cavity, diaphragm, & gear styles. Packing replacement & mechanical seal maintenance.
• Mixer Maintenance: shaft bearing, seals, glands, & packing replacement.
• Motor & Drive maintenance: Drive belt & chain replacement. coupler repair. gearbox reducer remove & disassemble. Motor plate adjustment
• Pneumatically actuated valve repair. Ball, gate, & butterfly styles
• Ability to install, cut, & thread pipe.
• Basic HVAC understating
• Basic electrical & wiring understanding
• Basic Air compressor understanding
• Basic water chiller understanding
• Basic Vacuum pump repair
• Basic home / office & maintenance
• Some welding skill
• Fork lift certification
• Valid Drivers License
• Able to lift 50+ pounds
• +++ Experience in paint shops or other chemical plants
• ++ scale & load cell install & repair experience
• ++ PLC & sensor install & repair experience
• ++ hydraulic repair experience
• + overhead door repair

Will Start on First Shift, But A Flexible Schedule and Hours Is Required:
Monday through Friday, Frequent Saturdays Sundays.
1st Shift:   6 AM to 2 PM, Monday through Friday
2nd Shift:  2 PM to 10 PM, Monday through Friday
3rd Shift:   10 PM to 6 AM, Sunday thru Thursday 

Pre-Hire Screening: 
10-Panel Drug Screen Including THC
Enhanced Nationwide & NSOPW 
(No Violent Crime Felony Convictions or Crimes against Women and/or Children)

This is a "Temp-To-Hire Position" after 90-Days in a Union Shop.

Once Hired In-house you will receive the following Benefits:
1) Health, Prescription, Vision, Dental and Life Insurance for a nominal fee.
2) Paid Time Off including: Holiday Pay, Personal and Sick Pay, plus Vacation Pay.
3) 401K with an Employer Matching Contribution.]]> Tue, 12 Apr 2022 00:00:00 EDT 0 Quality Control Technician - Taylor - All Shifts - $20 to $22 Per Hour
What We Do:

Bonding, Sealing and Surface Treatments Manufacturing for the Automotive Industry and other Industries

Job Responsibilities:

• Perform standard quality control testing on incoming raw materials, semi-finished goods, and finished goods according to defined specifications, including testing Visual and Physical Testing of Viscosity and Adhesion
• Calculate and Report Test Results
• Record Test Data into SAP
• File and Maintain the Retained Samples; Dispose of Old Retained Samples
• Maintain Lab Equipment in proper working order and Perform Equipment Calibrations
• Review, Write and Ensure the Accuracy of QC Methods
• Participate in Customer and Regulatory Audits

Professional Characteristics:

Will Train, but the Ideal Candidate has the following:

• 1 - 3 years' experience in a Manufacturing Quality Control Testing Environment
• Associates degree, BS in Chemistry is a Big Bonus, but not required
• Technically adept in Wet Chemistry, Analytical Methods, and Sophisticated Technologies
• Proven Problem Solving and Troubleshooting Skills in Laboratory Testing and Equipment
• Proficient with Gas Chromatography

Personal Characteristics: 

• Prompt & Reliable
• Strong Work Ethic
• Self-motivated
• Productive
• Follow through on Responsibilities
• Completes Tasks in a Timely Manner
• Requires Minimal Supervision
• Work well with others in a respectful manner 
• Communicate Well
• Team Player
• Goals Driven

Our Candidate will start on the First or Second Shift to Train, but once Trained and capable of working Independently, our Candidate will be assigned to the Third Shift.

Shift Schedule and Hours: (MUST Be Flexible and Able To Work ALL Three Shifts, As Required & Directed)
Monday through Friday, Frequent Saturdays and Occasional Sundays.
1st Shift:   6 AM to 2 PM, Monday through Friday 
2nd Shift:  2 PM to 10 PM, Monday through Friday 
3rd Shift:   10 PM to 6 AM, Sunday thru Thursday 

The first 40 hours per week are paid at Straight Time.
Over 40 hours worked, per week, is paid at Overtime.

Pre-Hire Screening: 
10-Panel Drug Screen Including THC
Enhanced Nationwide & NSOPW 
(No Violent Crime Felony Convictions or Crimes against Women and/or Children) This is a "Temp-To-Hire Position"
Once Hired In-house you will receive the following Benefits:
1) Health, Prescription, Vision, Dental & Life Insurance for a nominal fee.
2) Paid Time Off including: Holiday Pay, Personal and Sick Pay, plus Vacation Pay.
3) 401K with an Employer Matching Contribution.]]> Thu, 21 Oct 2021 00:00:00 EDT 0 Construction Carpenter Apprentice / Helper
Ypsilanti - Days - $18 to $24 Per Hour

This is a Full-Time / Long Term, Position primarily in Ypsilanti, MI and possibly in the Detroit and the Suburbs, working as a Construction Apprentice or Helper.

This person with work along side of a Journeyman Level Carpenter assisting in Construction Carpentry Tasks such as:
Rough & Framing Carpentry
Finish & Trim Carpentry
Hanging Drywall, Taping, Mudding, Prepping and Painting
Hanging Doors & Installing Windows, Trim, etc.
Kitchen, Bath, Basement Remodeling
Demolition
Removal and Replacement of Cabinets, Sinks, Appliances, Toilets, Tubs, etc.
Flood, Fire and Water and Storm Damage Restoration
Floors (Wood, Vinyl, Ceramic, Carpet, etc.)
Light Electrical (Lighting, Switches, Outlets, Pulling Wire, etc.)
Light Plumbing (Removal & Installation, Sinks, Tubs, Toilets, Hot &Cold Supply)
Decks
Roof and Ceiling Repair, etc.

PPE and Steel Toed Work Boots are required 

Prior Construction, Building/Property Maintenance and basic Hand and Power Tools experience is required.

Wage Rate:  $18 to $24 Per Hour, Determined after Job Site Interview

Shift: First

Hours: 7 AM to 4:30 PM

Note: Must have Current MDL, Auto Insurance and own reliable Transportation to Drive own Vehicle to/From Job Sites and possibly Drive a Company Vehicle.
]]> Wed, 16 Oct 2019 00:00:00 EDT 0